Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Mounting Plate
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.970 inches and 2.030 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.100 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 6.970 inches and 7.030 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.179 inches all holes and 0.185 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
There are two holes at each end of piece located 0.310 inches with a variation of plus or minus 0.030 inches from ends, the sets of two holes at the ends are located 6.375 inches from bsc along the length and 1.000 inces bsc along the width; the first hole is located 0.988 inches from left end bsc holes, the second hole is located 2.388 inches from left end holes bsc, the third hole is located 3.588 inches from left end holes bsc, the fourth hole is located 5.188 inches from left end holes bsc; the four holes are located 1.000 inch from the side of piece and 0.500 inches from end holes bsc; all holes have a dia. Of 0.180 inches with a variation of plus 0.005 and minus 0.001 inches and csk 100 degrees with dia. Of 0.337 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2, cl 1 military specification single treatment response
