Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.3140 inches and 0.3145 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.2585 inches and 1.2730 inches
Undercut Diameter:
Between 0.240 inches and 0.250 inches
Under Head Length:
Between 2.847 inches and 2.860 inches
Undercut Width:
Between 0.040 inches and 0.050 inches
First Hole Diameter:
Between 0.094 inches and 0.097 inches
Second Hole Diameter:
Between 0.094 inches and 0.097 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.774 inches and 0.804 inches
First End Taper Length:
Between 0.030 inches and 0.050 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
43.0 rockwell c and 48.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.490 inches and 0.500 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.120 inches and 0.123 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-1623 ty m cl 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
