Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
11y-5-as-y-01
Informationen zum Teil
Hex shaft both ends; motor 4.82in.L, 4.56in.H, 4.500in.W; mtg flange sae a-2 bolt, 5.12in.W; other end ears 2 places 180.0deg apart, with 0.500-13unc-28thd holes; ports sae 8 o-ring located on top; 7/16-20unf o-ring plug;
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Hydraulic Motor
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
4081.0 inch-pounds
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The shortest straight line between flats,perpendicular to the height of the wrenching surface.AAZK
Width Across Flats:
0.750 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.540 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.875-14 and 0.438-20
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
328.0
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
4.180 inches
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
A measurement of the longest dimension of a square end,in distinction from width.ANNL
Square End Length:
0.900 inches and 0.820 inches
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet and drain
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
2750.0psi continuous and 3250.Opsi intermittent at a known temperature
MRC:
The design of the connection.AXFC
Connection Design:
Threaded
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
10.600 cubic inches
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
18.4lbs; hydraulic fluid; operating temperature -40.0deg f to 125.0deg f
