Teilenummer 123486-2

Headless Shoulder Pin
Beschreibung

Pin

Lagerverfügbarkeit  Produkt-Bedingungscodes

Teilenummer 123486-2 ist in den folgenden Mengen und Zuständen vorrätig.

  • NS: 6
  • NE: 53

Hinweis: Die Verfügbarkeit dieses Artikels wurde zuletzt aktualisiert 01/20/2022 und kann sich seitdem verändert haben. Fordern Sie ein Angebot an, um aktuelle Preise und Verfügbarkeiten zu erhalten.

Preise und Verfügbarkeit

Reichen Sie dieses Formular ein, um die aktuellen Preise und die Verfügbarkeit dieser NSN zu erfahren.
Teilenummer:
Menge:
E-Mail-Adresse:
Telefon:
Referenz:
Firma:
Name:

Wir geben Ihre Daten nicht an Dritte weiter und verkaufen sie auch nicht.
Privatsphäre | Bedingungen

All major credit cards accepted as well as gov. p-cards

Historische Preise für dieses Produkt liegen zwischen 229.18 and 309.393 USD. Abhängig von Menge, Verfügbarkeit, Zustand, Lieferzeit und möglicher Einstellung eines Artikels können wir die Preise erst garantieren, wenn wir Ihnen ein aktuelles Angebot unterbreiten.

Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
123486-2
Entmilitarisierung:
No
Lagerfähigkeit:
N/A
Maßeinheit:
1 EA
NIIN:
011978211

Informationen zum Teil
Dry film lubricant

NSN
Nationale Bestandsnummer:
5315-01-197-8211 5315011978211
TXT
Beschreibung:
Headless Shoulder Pin
INC
INC
Artikelname-Code:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.835 inches
MRC:
None.AAUL
Width Between Flats:
Between 0.375 inches and 0.379 inches
MRC:
None.ABPR
First Step Diameter:
Between 0.8585 inches and 0.8590 inches
MRC:
None.ABPS
First Step Length:
0.950 inches
MRC:
None.ABPT
Second Step Diameter:
Between 0.6207 inches and 0.6211 inches
MRC:
None.ABPU
Second Step Length:
1.250 inches
MRC:
None.ABPV
Third Step Diameter:
0.500 inches
MRC:
none.ABPW
Third Step Length:
0.900 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Socket
MRC:
None.AKVA
Second End Counterbore Depth:
0.060 inches
MRC:
None.AMCS
First End Taper Length:
Between 0.060 inches and 0.070 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
MRC:
None.CRMG
First End Taper Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5629 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

Ähnlich Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
Jetzt vergleichen»
Klar | Verstecken