Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
123lm60003-11
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Rod End Connector
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.281 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
39.0 rockwell c and 42.0 rockwell c
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
Between 0.3735 inches and 0.3745 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
0.110 inches
Shoulder Length:
0.125 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 0.127 inches and 0.133 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
1.312 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
2.625 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of a body.AZTN
Bodydiameter:
0.625 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
0.937 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-8844, class1 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
