Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
13216e6124-4
Informationen zum Teil
Terminal length, glass sleeve insulation 0.380 in. Min lg, 0.620 in. Maximum lg located at axial stud end
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Axial stud type mounting facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Tubular, threaded
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 16.250 inches and 16.360 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Wire lead w/terminal lug
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
Between 8.250 inches and 8.750 inches
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
Between 0.540 inches and 0.580 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.310 inches and 0.320 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 15.690 inches and 15.810 inches
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
598.5 single voltage or 661.5 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
1
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.438 inches mounting facility
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
28.0 per inch mounting facility
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat and test and spcl
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
114.0 ac single voltage or 126.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Single single voltage
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel resistance wire embedding/support insulation and chromium resistance wire embedding/support insulation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel sheath and chromium sheath and iron sheath
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Manganese resistance wire and nickel resistance wire
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Terminal lugs shall accept 0.250 by 0.032 in. Male tabs and have a 5 lb extraction force after sixth extraction
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
97403-13216e6124 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unef mounting facility
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
4 type
