Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
160d950825-101
Informationen zum Teil
Filler foam
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.250 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
23.260 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with angled cutoff along top/long edge; from near surface at top edge to 5.50 from top on far surface; with cutouts on each top corner: with inner bottom corner a 90 degree arc with radius 1.25 centered 1.54 from outer edge & 4.81 from top with cutout extending horizontally & vertically to outer edges; an arched cutout, opening on top edge 12.31 & 17.31 inches from left edge, slanting down & to right with width of 5.00, ending in circle with 2.50 radius, centered 16.95 from left & 3.62 from bottom; a line cut thru, 1.56 from left cut edge at top edge, vertically down 5.5 inches on near surface & slanting down to 6.75 inches from bottom on far surface; near side is marked "fwd" & "up" on 2 lines at left top & with part number in lower left corner
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
