Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
Temperature chamber
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Environmental Testing Chamber
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
48.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
75.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
48.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 55.0 hertz and 65.0 hertz
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
28.000 inches
MRC:
An inside measurement between specified points of an item,in distinction from height.AFEF
Inside Depth:
26.000 inches
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
30.000 inches
MRC:
The form of assembly in which the item is supplied,whether completely assembled or specifying a degree of assembly which inherently describes the presence of a space saving feature.AFPM
Assembly Form:
Assembled
MRC:
The means provided to close the opening of the item.AFPP
Closure Method:
Hinged cover
MRC:
The number of compartments formed by partitions.AFPV
Compartment Quantity:
1
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Chamber, environmental testing; tests altimeters aau altitude transducers cpu-46a
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
220.0 pounds per hour dry and 240.0 pounds per hour with retaining chain
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 220.0 volts and 240.0 volts
MRC:
The amount of electrical energy that can be dissipated.ANPT
Power Rating:
350.0 watts finished-washer faced and 1000.0 watts microwatts
MRC:
The amount of electrical energy that can be dissipated.ANPT
Power Rating:
Between 350.0 watts and 1000.0 watts
MRC:
Indicates the type of control.AQZF
Control Type:
Toggle switch and selector switch and bleeder valve and vacuum gage
MRC:
The location of the opening on the item.ARQT
Opening Location:
Left side or right side
MRC:
The minimum and maximum operating temperatures at which the item is rated,expressed in degrees celsius.ASQJ
Operating Tempurature Range In Deg Celsius:
-73.3/+121.0
MRC:
The minimum and maximum operating temperatures at which the item is rated,expressed in degrees celsius.ASQJ
Operating Tempurature Range In Deg Celsius:
-73.3 to 121.0
MRC:
The heat source for which the item is designed.AZZH
Heat Source For Which Designed:
Integral
MRC:
The means by which the item is heated.BDWT
Heating Method:
Electrical
MRC:
The means used to provide circulation.BHGT
Circulation Method:
Mechanical
MRC:
An indication of whether or not a door(s) is provided.BHJQ
Door:
Provided
MRC:
An indication of whether or not cooling coils for below room temperature use are included.BNDW
Cooling Coils For Below Room Tempurature Use:
Included
MRC:
The number of outer doors included.BQMN
Outer Door Quantity:
2
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.CBME
Cubic Measure:
172800.000 cubic inches
MRC:
Indicates the type of environmental chamber.CWZY
Environmental Chamber Type:
Temperature
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Temperature chamber with removable holding rack 1 neoprene plug 4.000 in. Dia. Pressure control panel, rubber tubing ea 8.000ft lg., 3 plugs
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Copper and rubber, chloroprene and metal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper and rubber chloroprene class cr
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc and enamel
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
The chamber is used for subjecting altimeters and altitude transducer computers, similar to the aau-19/a and cpu-46/a respectively, to precisely controlled temperature environments during scale error testing
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Zinc and enamel, black
