Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.690 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.425 inches and 2.435 inches
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.750 inches and 0.770 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.090 inches and 0.110 inches
First Diameter From Head:
Between 0.358 inches and 0.368 inches
Second Diameter From Head:
Between 0.4535 inches and 0.4575 inches
Third Diameter From Head:
Between 0.358 inches and 0.368 inches
Fourth Diameter From Head:
Between 0.434 inches and 0.435 inches
Fifth Diameter From Head:
Between 0.358 inches and 0.368 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
Between 0.340 inches and 0.360 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
0.650 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 0.820 inches and 0.840 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
0.890 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
1.510 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.4375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
34.0 rockwell c and 40.0 rockwell c
Err Default:
Err default and err default
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
4
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
Between 1.560 inches and 1.580 inches
Err Default:
Err default and err default
Sixth Diameter From Head:
Between 0.434 inches and 0.435 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6322 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
