Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Automotive Axle Shaft
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
45.750 inches
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.375 inches
MRC:
The length of a straight line which passes through the center of the first end gear,and terminates at the outside circumference.AMEE
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the first end gear,and terminates at the outside circumference.AMEE
First End Gear Outside Diameter:
3.000 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
2.500 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
1.812 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
1.937 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Beveled gear
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of holes provided.ASXK
Hole Quantity:
1
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
20
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Straight
MRC:
Indicates the type of hole(s) provided on the end of the item.BNTX
End Hole Type:
Drilled
MRC:
The number of individual teeth on the first end gear.BNYN
Err Default:
Err default
MRC:
The number of individual teeth on the first end gear.BNYN
First End Gear Teeth Quantity:
15
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end gear.BNYQ
Err Default:
Err default
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end gear.BNYQ
First End Gear Pitch Diameter:
2.625 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
