Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Valve Seat
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 0.749 inches and 0.750 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.088 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 0.075 inches and 0.090 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
Between 0.370 inches and 0.390 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.370 inches and 0.390 inches
Flange Seat To Disk End Height:
Between 0.235 inches and 0.240 inches
Under Flange Height:
Between 0.210 inches and 0.215 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJSG
Seat Angle In Deg:
60.000
MRC:
The physical configuration of the surface of the seat.CQKM
Seating Surface Shape:
Angular
Body Stepped Inside Diameter:
0.052 inches first step and 0.058 inches first step
Body Stepped Inside Diameter:
0.245 inches second step and 0.260 inches second step
Body Stepped Inside Diameter:
0.052 inches and 0.058 inches first step
Body Stepped Inside Diameter:
0.245 inches and 0.260 inches second step
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/8 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain flanged
