Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
Plus twelve each alternating undercuts and shoulders of 0.188 and 0.250diameters respectively, distances frombeginning of eleventh diameter from largest bearing surface of head to the end of the twenty-second diameter are 5.422, 5.953, 6.156, 6.688, 7.172, 7.734, 7.938, 8.484, 8.703, 9.203, 9.641, and 9.859
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.875 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
10.734 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee chamfer
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
0.375 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.281 inches
Distance From Centerline To Flat:
0.172 inches
First Diameter From Head:
0.250 inches
Second Diameter From Head:
0.188 inches
Third Diameter From Head:
0.250 inches
Fourth Diameter From Head:
0.188 inches
Fifth Diameter From Head:
0.250 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.484 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
1.188 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
1.391 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
2.094 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
2.484 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.ABQJ
Point Style:
Flat
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
11
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
3.281 inches
Sixth Diameter From Head:
0.188 inches
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
