Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
3413-1221-2425
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Upright Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
The rated power of the electric motor.ABYE
Electric Motor Power Rating:
5.000 horsepower
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the type of head provided.AJGD
Head Type:
Sliding
MRC:
An indication of whether or not a treatment is included to produce a fungus resistant condition.AKSQ
Fungus Resistant Treatment:
Not included
MRC:
An indication of whether or not shielding against radio interference is provided.ALBH
Radio Interference Shielding:
Not provided
MRC:
An indication of whether or not a reversible rotation feature is included.ALYE
Rotation Reversibility Feature:
Not included
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Power
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
5.000
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
Designates the commercial taper size of the spindle socket.BNRK
Spindle Socket Taper Size:
No. 4 morse taper
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
12.500 inches
MRC:
A measurement of the longest dimension of the base working surface,in distinction from width.BNRW
Base Working Surface Length:
28.000 inches
MRC:
A measurement taken at right angles to the length of the base working surface,in distinction from thickness.BNRX
Base Working Surface Width:
24.000 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
3.000 in mild steel
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Box
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
12.500 inches
MRC:
Indicates the type of base working surface provided on the item.BNSF
Base Working Surface Type:
Slotted w/coolant trough
MRC:
The physical configuration of the base working surface.BNSG
Base Working Surface Shape:
Rectangular
MRC:
A measurement of the base working surface area on the item.BNSH
Base Working Surface Area:
Any acceptable
MRC:
The distance the base working surface can be adjusted vertically.BNSK
Err Default:
Err default
MRC:
The distance the base working surface can be adjusted vertically.BNSK
Base Working Surface Vertical Adjustment:
17.000 inches
MRC:
Indicates the location of the item on which the base working surface is mounted.BNSL
Base Working Surface Mounting Location:
Column
MRC:
The maximum distance from the chuck or spindle nose to the base working surface.BNSM
Maximum Distance From Chuck/spindle Nose To Base Working Surface:
33.000 inches
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
18.000 inches
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Tapered socket
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
9
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+50.0/+1000.0
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+50.0 to 1000.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
