Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
Hole drilled in center of screw tip 0.098-0.105 in. Diameter by 1.093-1.110 in. Deep
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 1.540 inches and 1.570 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.180 inches and 2.200 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.125 inches and 0.137 inches
Width Between Flats:
Between 0.432 inches and 0.437 inches
First Diameter From Head:
Between 0.410 inches and 0.430 inches
Second Diameter From Head:
Between 0.490 inches and 0.491 inches
Third Diameter From Head:
Between 0.400 inches and 0.420 inches
Fourth Diameter From Head:
Between 0.490 inches and 0.491 inches
Fifth Diameter From Head:
Between 0.400 inches and 0.420 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
Between 0.060 inches and 0.063 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 0.930 inches and 0.960 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 1.071 inches and 1.101 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
Between 1.600 inches and 1.630 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
Between 1.953 inches and 1.963 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.500 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
