Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
46-152230g50
Entmilitarisierung:
Yes - DEMIL/MLI
Informationen zum Teil
Rotor shut-off board
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Circuit Card Assembly
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.400 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.562 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.400 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6525-01-159-3009, field radiographic/fluoroscopic x-ray systems; model dxd 350 ii
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Major components: printed wiring board 1; relay 2; capacitor 50v 1; resistor 15k ohm 1; rectifier 400prv 1; capacitor 200vdc 3; transistor 2.2k ohm 2; capacitor 100vdc 3; resistor 15m ohm 1; diode switch 2; resistor 4.7k ohm 1; resistor 100 ohm 1; rectifier s.C. 1; lead wire 1; resistor 3.9k ohm 1; resistor 1k ohm 2; rectifier 200prv 1; resistor 33k ohm 1; resistor 10m ohm 1; transistor 30w 1; resistor 47 ohm 1; potentiometer 1; terminal 12; purchase description identification: 24456-46-152230g50; mounting configuration: two 0.177 in. Diameter holes on 4.000 in. By 0.200 in. Centers; two 0.177 in. Diameter holes on 4.000 in.By 4.000 in. Centers
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Relay cross bars silver
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
24456-46152230-t drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
