Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
520-opc-30t-24
Entmilitarisierung:
Yes - DEMIL/MLI
Informationen zum Teil
500 series orderpicker
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Fork Lift Truck
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
72.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
40.000 inches
MRC:
A measurement of the longest dimension of a fork,in distinction from width.AGBS
Fork Length:
42.000 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
4.000 inches
Overall Height With Forks In Lowest Position:
161.000 inches
Overall Height With Forks In Highest Position:
246.000 inches
MRC:
A measurement of the longest dimension of the battery compartment,in distinction from width.AGCA
Battery Compartment Length:
31.000 inches
MRC:
A measurement taken at right angles to the length of the battery compartment,in distinction from thickness.AGCB
Battery Compartment Width:
13.000 inches
MRC:
A measurement between specified points on the battery compartment,in distinction from height.AGCC
Battery Compartment Depth:
30.880 inches
MRC:
The radius of a circle formed by the outermost part of a vehicle while executing the shortest possible turn.AGCQ
Vehicular Turn Radius:
72.000 inches
MRC:
A measurement of the distance from the front face of the forks to a specified point at which the rated load capacity is determined.AGCT
Fork Load Center Distance:
24.000 inches
MRC:
Indicates the type of lift mechanism included on the item.AGDC
Lift Mechanism Type:
Hydraulic
MRC:
The means by which the lift is actuated.AGDD
Lift Actuation Method:
Powered
MRC:
The distance measured from the ground/floor surface to the load carrying surface in the lowest position.AGDE
Minimum Load Carrying Surface Height:
3.250 inches
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Automatic
MRC:
The maximum rated load the item is designed to accommodate.AYXK
Maximum Load Rating:
3000.000 pounds
MRC:
An overall measurement of the distance between the ground surface and the bottom of an item.CHLD
Overall Underclearance:
2.000 inches
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
2 single pneumatic drive wheel
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
2 single pneumatic load wheel
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Operator platform is 28.5 in long and 39 in wide and stays on the same level as the forks; has flip up side gates to increase operator efficiency and safety located 40 in up from platform; has a safety belt and tether; travel speed loaded 5 mph forks first and 5.5 mph tractor first, unloaded 5.5 mph forks first and 6.0 mph tractor first; power unit 24 volt single drive
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Stacker w/straddle outriggers
