Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 1.260 inches and 1.300 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 8.420 inches and 8.460 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double hexagon extended washer
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.395 inches and 0.415 inches
Width Between Flats:
Between 0.430 inches and 0.439 inches
Extended Washer Diameter:
Between 0.820 inches and 0.840 inches
Extended Washer Thickness:
Between 0.065 inches and 0.085 inches
First Diameter From Head:
Between 0.3736 inches and 0.3740 inches
Second Diameter From Head:
Between 0.315 inches and 0.320 inches
Third Diameter From Head:
Between 0.3736 inches and 0.3740 inches
Fourth Diameter From Head:
Between 0.315 inches and 0.320 inches
Fifth Diameter From Head:
Between 0.3736 inches and 0.3740 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
Between 0.400 inches and 0.440 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 3.800 inches and 3.840 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 4.180 inches and 4.260 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
Between 6.740 inches and 6.780 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
Between 7.120 inches and 7.200 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
220000 pounds per square inch
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
