Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
End opposite head is drilled 0.159 in. Diameter 0.750 in. Deep and tapped 10-32 nf-2 0.300 in. Deep on axial c ctr line
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.375 inches and 0.3754 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.146 inches and 1.166 inches
Undercut Diameter:
Between 0.350 inches and 0.354 inches
Under Head Length:
1.250 inches
Undercut Width:
Between 0.028 inches and 0.031 inches
Second Undercut Width:
Between 0.047 inches and 0.062 inches
Second Undercut Diameter:
Between 0.365 inches and 0.370 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through center
First Hole Diameter:
0.094 inches
MRC:
The measured distance from a fixed point to a variable point on a curve or curved surface.ALWR
First End Corner Radius:
0.020 inches
Pin Head Diameter:
0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches head bearing surface
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches shoulder end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches long end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.094 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
