Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Entmilitarisierung:
Yes - DEMIL/MLI
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Waveguide Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Internal, rectangular external, rectangular
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b first flange all connection facilities
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first flange all connection facilities
MRC:
The angular measurement by which one part/section of a rigid item deviates from a straight line projection of an adjacent part/section,expressed in degrees.ACJL
Bend Angle In Deg:
45.0 all bends h-plane
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mk15 mods 11-14 and 21-25, ciws, depot level
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
3
Flange Inside Width:
0.633 inches first flange
Flange Inside Width:
0.633 inches second flange
Flange Inside Height:
0.712 inches first flange
Flange Inside Height:
0.712 inches second flange
Flange Outside Width:
1.313 inches second flange
Flange Outside Width:
2.438 inches first flange
Flange Outside Height:
1.594 inches first flange
Flange Outside Height:
2.500 inches second flange
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.125 inches second flange
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.237 inches first flange
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.147 inches second flange all connection facilities and 0.154 inches second flange all connection facilities
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.10
MRC:
The difference in the amount of energy available before and after the insertion of an apparatus in a transmission system,expressed in decibels.AHTX
Insertion Loss In Decibels:
0.35
Waveguide Outside Width:
0.702 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.138 inches first flange all connection facilities
Waveguide Inside Width:
Between 0.620 inches and 0.624 inches
Waveguide Inside Height:
0.712 inches
Waveguide Outside Height:
0.792 inches
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
12 threaded hole first flange all connection facilities
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
4 unthreaded hole second flange all connection facilities
Waveguide First Leg Length:
4.116 inches
Waveguide Fifth Leg Length:
4.116 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Contact type first flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Contact type second flange
Waveguide Second Leg Length:
9.136 inches
Waveguide Third Leg Length:
6.750 inches
Waveguide Fourth Leg Length:
9.136 inches
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid all tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 all tubing segment and flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Four bend type
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc first flange all connection facilities
