Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Fluid Passage Bolt
Concentric Hole Depth:
Between 0.670 inches and 0.705 inches
Concentric Hole Diameter:
Between 0.169 inches and 0.179 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.615 inches and 0.790 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.060 inches and 0.080 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.679 inches and 0.690 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.230 inches and 0.285 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
Between 0.070 inches and 0.090 inches
First Diameter From Wrenching Feature:
Between 0.448 inches and 0.450 inches
Second Diameter From Wrenching Feature:
Between 0.340 inches and 0.360 inches
Third Diameter From Wrenching Feature:
Between 0.448 inches and 0.450 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.080 inches and 0.100 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
Between 0.290 inches and 0.330 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
Between 0.450 inches and 0.470 inches
First Radial Fluid Hole Diameter:
Between 0.169 inches and 0.179 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 0.585 inches and 0.615 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 0.790 inches and 0.810 inches
Wrenching Feature Height:
Between 0.230 inches and 0.250 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 26.0 rockwell c and 34.0 rockwell c
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.4375 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5610 assn standard single material response
