Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
77c730131p001
Informationen zum Teil
Closed end; weapon system essential
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Dust And Moisture Seal Boot
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.020 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.970 inches and 5.030 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
Between 4.470 inches and 4.530 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
Between 1.470 inches and 1.530 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.970 inches and 1.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.970 inches and 2.030 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.020 inches and 0.080 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.201 inches and 0.209 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Arleigh burke class ddg, spruance class dd (963), an/sqq-89 surface shipasw combat system, ticonderoga class cg (47)
MRC:
The means of attaching the item.AXGY
Mounting Method:
Flange and unthreaded hole
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.BGKB
Baselength:
Between 4.090 inches and 4.150 inches
First Distance From Mounting Hole Center To Base Edge:
Between 0.220 inches and 0.280 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
Distance From Inside Opening To Base Edge:
Between 0.590 inches and 0.650 inches
Second Distance From Mounting Hole Center To Base Edge:
Between 0.220 inches and 0.280 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone body
