Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.210 inches and 0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.920 inches and 7.960 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.360 inches and 3.400 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
Between 0.220 inches and 0.280 inches
Outside Corner Radius:
Between 0.220 inches and 0.280 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 1.970 inches and 2.030 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 6.530 inches and 6.590 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.500 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.500 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.930 inches and 0.950 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.836 inches and 0.886 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.120 inches and 0.140 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
12
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
65.0 shore durometer a and 75.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
91499-jcn20a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Turbine, refrigeration unit, acft
