Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
81612s41-1279pc2
Informationen zum Teil
Notch cut in bb end /1/ 0.875 in. Plus 0.010 minus 0.000 w, /2/ 1 in. Deep, /3/ the outer edge located 5-9/16 in. From center
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Sprocket Wheel
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
13.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.438 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
6.750 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.813 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
13.135 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
6
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.746 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
20.0 rockwell c hub and 28.0 rockwell c hub
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
The first hole located 30 degrees from center line of machined notch
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
The means by which the item is secured.BSNP
Securing Method:
Drilled hole
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
Designates the belt,chain,or film size for which the item is designed.BYFH
Belt/chain/film Size For Which Designed:
Roller chain
MRC:
Indicates the type of roller chain pitch for which the item is designed.BYFJ
Roller Chain Pitch Type For Which Designed:
Single pitch
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
3
MRC:
The center to center distance between the teeth rows.BYFM
Center To Center Distance Between Teeth Rows:
0.707 inches
MRC:
The number of teeth included in each row.BYFN
Teeth Quantity Per Row:
66
MRC:
The american standards association number by which the chain is identified.BYFP
Asa Standard Chain Number:
E-50
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Rockwell
MRC:
A numeric value that reflects the hardness of the teeth when used in conjunction with a hardness rating scale.BYFR
Teeth Hardness Rating:
Between 20.0 rockwell c and 28.0 rockwell c
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
MRC:
An indication of whether or not a hub external keyway is included.BYFW
Hub External Keyway:
Not included
MRC:
The center to center distance between teeth measured along the pitch line.BYGF
Tooth Pitch:
0.625 inches
Hub End Outside Diameter And Location:
8.750 inches both ends
Distance From Outside Flange/rim To Hub End And Location:
0.691 inches aa end and 1.563 inches bb end
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, sae 1045
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1045
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 1045 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
