Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Entmilitarisierung:
Yes - DEMIL/MLI
Informationen zum Teil
L2 sq holes on first shoulder 2.500 from end of cam, 0.625 in. By 0.625 in., 0.625 in. Apart, 1 hole drilled on plain shank, 0.266 in. Dia, 0.250 in. From end to center of hole, 0.062 in. By 45 degrees chamfer on shank end
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Brake Shoe Actuating Camshaft
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.500 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 1.456 inches and 1.466 inches
MRC:
A measurement of the longest dimension of the step,in distinction from width.ABGJ
Step Length:
0.125 inches and 4.375 inches and 6.562 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.688 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.438 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.493 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.495 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.469 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Unable to decode
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
16.812 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
1.000 inches
MRC:
A measurement taken at right angles to the length of the cam,in distinction from thickness.AGEN
Cam Width:
1.125 inches
MRC:
The number of cams included on the item.AGEX
Cam Quantity:
1
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 1.140 inches and 1.145 inches
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Straight spline
MRC:
Indicates the location of the cam on the item.AYSS
Cam Location:
On end
MRC:
The physical configuration of the cam.AYSW
Cam Shape:
S
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Counterclockwise
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the cam.AYSZ
Camlength:
1.750 inches
MRC:
A measurement of the smallest dimension of the cam,in distinction from length or width.AYTA
Cam Center Thickness:
1.375 inches
MRC:
Indicates the type of shaft shank provided.AYTK
Shaft Shank Type:
Plain
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
2 sq holes on first shoulder 2.500 from end of cam, 0.625 in. By 0.625 in., 0.625 in. Apart, 1 hole drilled on plain shank, 0.266 in. Dia, 0.250 in. From end to center of hole, 0.062 in. By 45 degrees chamfer on shank end
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-633, fs1085-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, qq-s-633, fs1085-canceled
