Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
Gasket, gland plate
NSN
Nationale Bestandsnummer:
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.281 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.250 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
2.750 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
10.750 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
3.875 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
2.875 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.375 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.375 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.125 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
12
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Panel, ctrl, ch
Outside Edge To Inside Edge Smallest Distance Along Width:
0.750 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
0.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Holes along length centered from outside edge of length at 3 1/4in, 6 1/8in, 9 in, 11 7/8in, and 12 1/4in
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
