Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Informationen zum Teil
Coupling, flexible, amerigear
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Flexible Shaft Coupling
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.380 inches and 8.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
9.440 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.750 inches and 0.752 inches both ends
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.875 inches and 0.877 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
3.279 inches and 3.289 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
4.007 inches and 4.017 inches first end
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
0.750 inches and 0.752 inches second end
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
0.875 inches and 0.877 inches first end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.951 inches and 2.952 inches second end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.621 inches and 3.623 inches first end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
3.590 inches both ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hu hauling wi, delivery code 4224
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Multijaw
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
The angle at which the keying facility(ies) is spaced,expressed in degrees.BSGJ
Keying Facility Spacing In Deg:
0.0 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Clamp both ends
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Refer to drawing for additional details
