Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
f15-0064c-02ts-8330930b882049251
Informationen zum Teil
Items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components; these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines and shore stations of the us navy; critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics and metallurgical properties will be specified for government qar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts; 1.062 inches thick; 0.875 inch bolt hole diameter; 11.750 inch bolt circle diameter; flange raised height 0.062 inches; flange raised face diameter 10.625 inches
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Gate Valve
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.AAMW
Flange Diameter:
13.500 inches
MRC:
Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR
Bonnet Type:
Outside screw-yoke
MRC:
The means by which the bonnet is attached to the item.ADST
Bonnet Attachment Method:
Bolted
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange, round w/holes
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Bonnet packing
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
150.0 pounds per square inch steam
MRC:
Indicates the type of stem furnished with the item.CRKP
Stem Type:
Rising
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
500.0 degrees fahrenheit steam
MRC:
The face to face distance.CWCF
Face To Face Distance:
11.500 inches
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cobalt alloy disk
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cobalt alloy seat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410 stem
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66, aisi 410/sae 51410 federal standard single material response stem
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
A105, grade 2 assn standard single material response body
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
D composition
MRC:
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.ZZZW
Departure From Cited Document:
As modified by temp rating
