Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Engine Accessory Generator
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.378 inches
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Cooling fan
Second Step Diameter:
Between 0.668 inches and 0.669 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.125 inches
Unthreaded Portion Length:
0.720 inches
MRC:
The direction of the mounting hole thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACJC
Mounting Hole Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting.ADER
Mounting Style:
Bracket mtd w/three mtg holes, top hole threaded
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
0.625 inches
MRC:
An indication of whether or not an item is capable of operation while submerged.AHZV
Submersibility:
Nonsubmersible
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
Indicates the type of ground polarity utilized.AXHX
Ground Polarity Type:
Negative
MRC:
The minimum speed the armature can revolve and maintain full current output,expressed in revolutions per minute.BCGD
Armature Minimum Speed In Rpm At Full Current Output:
1800
MRC:
The cut-in speed necessary to maintain a minimum current flow,expressed in revolutions per minute.BCGG
Minimum Current Cut-in Speed In Rpm:
1100
MRC:
The means by which the item is grounded.BCGN
Grounding Method:
Internal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft drive end.BCGS
Shaft Drive End Style:
Straight shaft end, threaded, w/keyway
Distance Between Shaft Center And Bottom Mounting Hole Center:
3.060 inches
Distance Between Shaft Center And Top Mounting Hole Center:
3.060 inches
Angular Deviation Of First Hole From Top Center In Deg:
31.0
Angular Deviation Of Second Hole From First Hole In Deg:
149.0
Distance Between Inside Surfaces Of Hinge Bracket:
Between 7.118 inches and 7.136 inches
Distance Between Outside Surfaces Of Hinge Bracket:
Between 8.238 inches and 8.256 inches
Bottom Mounting Hole Diameter:
Between 0.323 inches and 0.333 inches
MRC:
The speed the armature can revolve and produce maximum current,expressed in revolutions per minute.BCND
Maximum Rated Armature Speed In Rpm:
4000
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for the specific diameter of a threaded mounting hole.CMLK
Mounting Hole Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of a threaded mounting hole,and terminates at the circumference.CMLL
Mounting Hole Thread Diameter:
0.313 inches
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
18
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
12.0
