Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
ryertexgradec-223
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Plastic Sheet
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Laminated
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
70.0 rockwell m and 110.0 rockwell m
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
Not rated
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 35.000 inches and 39.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 35.000 inches and 39.000 inches
MRC:
The ability of the material to transmit light and allow visual perception.ABWN
Material Transparency:
Opaque
MRC:
The backing or coating that is applied to the surface for protection of the basic material. it is intended to be stripped off prior to application of the fabricated item,and is not intended to become part of the sealing surface. excludes surface treatments,adhesive coatings,and lubricants.ADYX
Protective Covering Material:
Paper
MRC:
The element,compound,or mixture of which the strengthening feature is fabricated.ADZA
Strengthening Feature Material:
Cotton fabric
MRC:
The maximum load which can be applied normally to the plane of the material,per unit of cross-sectional area,that an item can withstand without fracture.ADZB
Flexural Strength:
Not rated
MRC:
An integral feature of the item which strengthens and/or stiffens the basic material.ADZK
Strengthening Feature:
Base
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Any acceptable
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, phenolic, mil-p-18324
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic and cotton
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-18324 military specification 1st material response
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by length and width
