Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
ss-9-f-sm-um
NSN
Nationale Bestandsnummer:
TXT
Beschreibung:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel
First End Outside Diameter:
0.750 inches
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Threaded mounting holes
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees fahrenheit
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
225.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.400 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
3.840 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
4.250 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance,and an external or internal threaded mounting facility.AKBM
Mounting Facility Thread Class:
2b
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
First End External Thread Length:
1.120 inches
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
8.320 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
11.320 inches
MRC:
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.AZCR
Mounting Facility Circle Diameter:
3.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Four hole bolt circle
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
125.0 pounds per square inch
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.438 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
14
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Pneumatic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Single acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
External threaded
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the first piston rod end.CKSG
First Piston Rod End Thread Series Designator:
Unf
MRC:
The length of a straight line which passes through the center of the first piston rod end which would bound the crest of an external thread or the root of an internal thread.CKSH
First Piston Rod End Thread Diameter:
0.750 inches
MRC:
The number of screw threads on the first piston rod end per linear inch measured on a line parallel to the thread axis.CKSJ
First Piston Rod End Thready Qty Per Inch (tpi):
16
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread of the first piston rod end.CKSK
First Piston Rod End Thread Class:
2a
MRC:
The direction of the first piston rod end thread when viewed axially. a right-hand thread winds in clockwise direction while a left-hand thread winds in a counterclockwise direction.CKSL
First Piston Rod End Thread Direction:
Right-hand
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Any acceptable piston rod end
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
Any acceptable
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 cylinder head end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Npt
MRC:
The industrial size designation used to indicate the diameter of the port pipe thread.CLMZ
Port Pipe Thread Size:
0.250 inches
