Teilenummer SSRI-1214ZZSD504RA3P25LG68

Annular Ball Bearing

Preise und Verfügbarkeit

Reichen Sie dieses Formular ein, um die aktuellen Preise und die Verfügbarkeit dieser NSN zu erfahren.
Teilenummer:
Menge:
E-Mail-Adresse:
Telefon:
Referenz:
Firma:
Name:

Wir geben Ihre Daten nicht an Dritte weiter und verkaufen sie auch nicht.
Privatsphäre | Bedingungen

All major credit cards accepted as well as gov. p-cards

Historische Preise für dieses Produkt liegen zwischen 41.38 and 55.863 USD. Abhängig von Menge, Verfügbarkeit, Zustand, Lieferzeit und möglicher Einstellung eines Artikels können wir die Preise erst garantieren, wenn wir Ihnen ein aktuelles Angebot unterbreiten.

Teilenummer
Entmilitarisierung
Lagerfähigkeit
UOM
NIIN
Teilenummer:
ssri-1214zzsd504ra3p25lg68
Entmilitarisierung:
No
Lagerfähigkeit:
N/A
Maßeinheit:
1 EA
NIIN:
001982926

Informationen zum Teil
Spressed stainless steel retainer heat treat parts per mil-h-6875; immediately after quenching, refrigerate parts at minus 120 to minus 90 degrees f for 2 hours; followed by tempering at a temp of plus 325 degrees f for 3 hours; repeat refrigeration and tempering steps at least once; final hardness should be rockwell c-58 min; ff-b-171 applies except for bearing type and dimensions; all other attributes of this bearing are i/a/w ff-b-171 qap eq003 applies source inspection required

NSN
Nationale Bestandsnummer:
3110-00-198-2926 3110001982926
TXT
Beschreibung:
Annular Ball Bearing
INC
INC
Artikelname-Code:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.2812 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.2500 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
0.7500 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Pressed
MRC:
The number of shields included on the item.AGYK
Shield Quantity:
2
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The designation specifying the type of fit as recognized by industrial and governmental agencies.AGZH
Internal Fit-up Designation:
Standard
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.3
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Pressed stainless steel retainer heat treat parts per mil-h-6875; immediately after quenching, refrigerate parts at minus 120 to minus 90 degrees f for 2 hours; followed by tempering at a temp of plus 325 degrees f for 3 hours; repeat refrigeration and tempering steps at least once; final hardness should be rockwell c-58 min; ff-b-171 applies except for bearing type and dimensions; all other attributes of this bearing are i/a/w ff-b-171 qap eq003 applies source inspection required
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Grease
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Mil-g-23827 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-loading groove, non-separable

Ähnlich Annular Ball Bearings

« Bearings Antifriction Unmounted {lang[catalog]}
Jetzt vergleichen»
Klar | Verstecken